3D Pen for Kids with 7.5M long 1.75MM PLA - 2017 Tipeye Newest RED Version 3D Doodler Pen Kits 3D Printing Pen with LCD Display PLA Filament Refills for Adults, Doodling, Artist, Girls, DIY etc
【Normal Temperature 3D pen】Compatible with Both ABS & PLA Filament - The Aircraft-grade aluminum 3D drawing pen is suitable for both 1.75mm ABS & PLA Filament. PLA Filament is non-toxic and odorless,safer than ABS, and tend to be widely-used filaments.Please do not use with PCL filament.
【Adjustable Temperature and Speed】The 6th Tipeye 3d pen is compatible with both ABS & PLA Filament. PLA Filament is non-toxic and odorless,safer than ABS, and tend to be widely-used filaments, included 1*24.6ft(7.5m) length PLA filament.Please do not use with PCL filament.The Aircraft-grade aluminum 3D printing pen enables you control the temperature and speed when you enjoy drawing.
【Advanced LCD Display】 The 3d doodler pen LCD screen shows temperature, speed, filament, which enables you control the temperature and speed when you enjoy drawing 3D model.Receive one 3d paper model free. Add paper model [asin: B072NYTGBZ] to cart together. This 3d art pen is best gift for Christmas, kids, doodling art craft making and artists
1.Connect the 3d pen to power supply(5V/2A),It enters into standby condition when the LCD screen displays "PLA" or "ABS" .
2. Mode Options：Please press the “L” button and press the “◀” ( load filament button ) button once to confirm and the pen rises the temperature automatically.(If you need to switch the filament mode after a period time of using,then please stop loading the filament and unload the filament and cut the power supply and connect once again to switch the filament mode ).
3.In PLA or ABS mode, press the “L” button each time to switch the mode of the speed that load the filament.
4.Press the “◀” button once to stop loading, press the “▶” button once to start unloading automatically.
5.This product will automatically enter into standby mode without using of 3 minutes and the LCD screen displays "SLEEP" . Please press the "«" button once to activate.
1.Product applicable age: 5 years old and above.
2. Please make sure the cut end of the product is even each time when you use it.When the filament is running out please also make sure the other end of the filament is even otherwise it will get stock.
3.This product is a precision electronic product,the continuous working time is 3 hours, please do not use it more than 3 hours, so as to avoid damage to the pen and motor.
4.Pay attention to the temperature of the nozzle, please do not touch the nozzle during use.The temperature of the normal temperature 3d pen nib can reach 50℃.
5. Please do not use the nib to touch other hard objects.
6.Please do not use foreign materials to load the hole of load the filament or the nib.
7. Please do not use other manufacturers’ consumables, so as not to cause incompatibility.
8.This product is not waterproof.
9. Make sure that the filament is completely out of the pen and cut off the power supply after using.
10. Please put the pen in a place where children can not touch after using.
Manual 03A Low Temperature
2017 best Christmas gift 3D doodler pen is compatible with both PLA and ABS filament.
We recommend to use PLA filament which is non toxic and safer to use.
There are different colors and length of PLA filament sold by Tipeye.
(1) 12 colors 20 feet (6.1m) asin:B01MYA09QM
(2) 16 colors 20 feet(6.1m) asin:B072HGDJSZ
(3) 16 colors 40 feet(12.2m) asin:B07253L6DP
Keep the end of filament to the 3d pen be trim before loading:
Connect the included 5V/2A adapter to the power supply or the included USB cable to 5V/2A mobile power supply.Press the “◀” button once to activate the pen, the LED function indicator shows red color.
When the temperature of the pen rises automatically to the default setting temperature,the LED function indicator turns into green.Then you can load the PLA filament. (Please make sure that the end of the filament is smooth and even,Please gently push the other end of the filament until it goes through the gear.) Then press the “◀” button once to start loading automatically.
After using, press the “◀” button once to stop loading, press the “▶” button once to start unloading automatically,when the unloading progress is about to finish please pull the filament gently out of the pen.
How to switch filament option:
In PLA or ABS mode, press the “L” button each time to switch the mode of the speed that load the filament.The LCD screen displays the corresponding speed.Low speed: 5-1 (PLA mode: 190°C , ABS mode : 200°C) ,Medium speed : 5-2 (PLA mode: 200°C , ABS mode : 210) ,c High speed : 5-3 (PLA mode: 210°C , ABS mode : 220). Users can choose the appropriate mode according to painting proficiency.
The 6th generation 3D pen, durable Aircraft-grade Aluminum shell, more advanced than others.
Turn the 3D pen nozzle towards clockwise, you will remove the nozzle easily, and so does the pen cap.
Elevate your imagination:
One best gift for Christmas, Kids, young atitists, adults and teens. Adults can use it to build model and design your own artcrafts.
Make your workings more vivid and real.